INTRODUCTION ABOUT FREE ENERGY SYSTEM:
Magnet Engine free energy generator is an easy device to generate electrical energy. It works on the principle of Neodymium Magnets. In a simple motor, magnetic field is created by the electric coils generally Cu, Al coils. These motors continuously need electrical supply to produce magnetic field.
Nikola Tesla was a multi-disciplinary genius. His discovery of the rotating magnetic field in 1882 led to a series of US Patents in 1888, which gave us the AC electric power system still in use today. This one achievement earned him the honor of being called “The Man Who Invented the 20th Century”.
In electricity generation, a generator is a device that converts motive power (mechanical energy) into electrical power for use in an external circuit. ... The reverse conversion of electrical energy into mechanical energy is done by an electric motor, and motors and generators have many similarities.
FLY WHEEL:-
A fly wheel is a mechanical device specially designed to efficiently store rotational energy. Fly Wheel resists changes in rotational speed by their moment of inertia. The amount of energy stored in a flywheel is proportional to the square of its rotational speed. The way to change a flywheel’s stored energy is by increasing or decreasing its rotational speed by applying a torque aligned with its axis of symmetry.
Energy storage systems delivering energy at rates beyond the ability of an energy source. This is achieved by collecting energy in flywheel overtime and then releasing it quickly, at rates that exceed the abilities of the energy source.
CONFIGURATION:-
1.Fly wheel size
1'×10" Diameter.
2.Thicness 3".
3.Double Groove.
4.Fly wheel belt drive.
5 . Weight 20Kg.\
GENERATOR/ ALTERNATOR:-
Inside an alternator the belt-driven rotor becomes an electromagnet when current is fed to it. As the rotor revolves it generates a higher current in the stator windings
Moving a magnet past a closed loop of wire makes an electric current flow in the wire. Imagine a loop of wire with a magnet inside it.
The north pole of the magnet passes the top of the loop as the South Pole passes the bottom of it. Both passes make current flow in one direction round the loop.
The poles move away, and current stops flowing until the South Pole reaches the top and the north pole the bottom.
This makes current flow again, but in the opposite direction.
A car alternator uses an electromagnet in order to boost output of electric current.
How a dynamo works?
CONFIGURATION:-
Cairo Alternator/Power Generator.
Design on 12 DC volt
Pulley size 2.5"
Pulley single groove.
FIELD WINDING:-
Field windings inside the body are a dynamo's electromagnet. Current is generated in the revolving armature.
In a dynamo the electromagnets are stationary, and are called the field coils. The current is produced in an armature - another set of coils wound on to a shaft and turning inside the field coils.
UNIVERSAL BEARING:-
A bearing is a machine element that constrains relative motion to only the desired motion, and reduces friction between moving parts. The design of the bearing may, for example, provide for free linear movement of the moving part or for free rotation around a fixed axis; or, it may prevent a motion by controlling the vectors of normal forces that bear on the moving parts. Most bearings facilitate the desired motion by minimizing friction. Bearings are classified broadly according to the type of operation, the motions allowed, or to the directions of the loads (forces) applied to the parts.
Rotary bearings hold rotating components such as shafts or axles within mechanical systems, and transfer axial and radial loads from the source of the load to the structure supporting it. The simplest form of bearing, the plain bearing, consists of a shaft rotating in a hole. Lubrication is often used to reduce friction. In the ball bearing and roller bearing, to prevent sliding friction, rolling elements such as rollers or balls with a circular cross-section are located between the races or journals of the bearing assembly. A wide variety of bearing designs exists to allow the demands of the application to be correctly met for maximum efficiency, reliability, durability and performance.
CONFIGURATION:-
•Self allign block bearing.
•Bearing with block No. FKD P-208.
•Bearing internal dia 40mm
TIMER:-
Electronics component is called Timer relay and also called 8 pin relay. It is Use to transfer electricity power by normally open or normally close circuit according to given diagram as given on it. A wide variety of timer designs exists to allow the demands of the application to be correctly met for maximum efficiency, reliability, durability and performance.
CIRCUIT BREAKER:-
It is a safety or unfortunately in case of electric short circuiting happening its immediately cutt off electric power supply by trip off breaker. This is basically use for safety purpose for un happening during operation time.
CONCLUSION:-
According to our statement which we are declaring as under mentioned and research about science. Is science completely correct then where is your proof? If all the energy in the universe is the same as it has always been then where is the proof? Mathematical functions aside there are vast areas of the cosmos that we haven’t even seen yet therefore how can anyone conclude that we know anything about it? We haven’t even been beyond our solar system but you think that we can ascertain what happens with the laws of physics is a galaxy away? Where’s the proof?
“Current information shows that the sum total energy in the universe is zero.” Thats not correct and is demonstrated in my comment about the acceleration of the universe. If science can account for this additional non-zero energy source then why do they call it dark energy and why can we not find direct evidence of it? There is much that our current religion cannot account for.
Why isn’t this scientific theory of the Big Bang relevant? What makes it so in your mind because the source of energy and how it is produced or extracted is precisely the argument here. So saying that it doesn’t matter is no argument.
So what if force and energy are “confused.” It takes energy to produce a force. Whether or not the equations you are familiar with account for it or not. Energy must exist to cause a force in any direction. PE = m x g x h, the force of gravity being relavant here for instance.
“There is no magic involved. You just want there to be to support your desire for fantastical things to be real.”
Lacking a feasible explanation or even tangible evidence for this thing our science calls the Big Bang puts it into the realm of magic. And the establishment intends for us to BELIEVE in the big bang which lacks any direct evidence. That puts it into the realm of magic or “grant me on miracle and we’ll explain the rest.” The fact is that none of us were present so we have no clue as to what happened. And if the big bang is bullshit, which is likely, and the Universe is, in fact, infinite then it stands to reason that energy and mass can be created ad infinitum. Just because we don’t know the rules or methods of construction or destruction doesn’t mean that it is not possible. It just means that we haven’t figured it out yet.
You frequently attack my arguments as wishful thinking but don’t offer any decent argument against. You just simply say that I want there to be such and such to support my ideas. Very effective argumentation.
As for perpetual motion, if you can show me a heavenly body that is absolutely stationary then you win. But that has never once been observed. Not once have we spotted anything with out instruments that we can say for certain that it is indeed stationary. So perpetual motion is not only real but it is inescapable. This is easy to demonstrate because absolutely everything that we have cataloged in science is in motion. Nothing in the universe is stationary. So the real question is why do people think that perpetual motion is impossible considering that we have never observed anything that is contrary to motion. Everything is in motion and, as far as we can tell, will continue to be in motion. Sure Newton’s laws are applicable here and the cause and effect of those motions are also worthy of investigation. Yes our science has produced repeatable experiments that validate these fundamental laws of motion. But these laws are relative to the frame of reference. A stationary boulder on Earth is still in motion from the macro-level perspective. But then how can anything be stationary in a continually expanding cosmos? Where is that energy the produces the force? Where does it come from? How can anyone make the absurd claim that the energy in the universe is constant and yet be unable to account for the acceleration of the universe’s expansion. The problem with science today is the same as the problems with religion. We want to believe that we have a firm grasp on things so we accept our scientific conclusions until experimental results force us to modify those explanations. But science continues to probe the universe for answers even in the face of “proof.” That is science. Always probing for a better, more complete explanation of what works and what doesn’t. But to make claims about knowing the universe, its energy, its mass and so on is hubris and any scientist acknowledges the real possibility that our science could be proven wrong at any given point.
Magnet Engine free energy generator is an easy device to generate electrical energy. It works on the principle of Neodymium Magnets. In a simple motor, magnetic field is created by the electric coils generally Cu, Al coils. These motors continuously need electrical supply to produce magnetic field.
Nikola Tesla was a multi-disciplinary genius. His discovery of the rotating magnetic field in 1882 led to a series of US Patents in 1888, which gave us the AC electric power system still in use today. This one achievement earned him the honor of being called “The Man Who Invented the 20th Century”.
In electricity generation, a generator is a device that converts motive power (mechanical energy) into electrical power for use in an external circuit. ... The reverse conversion of electrical energy into mechanical energy is done by an electric motor, and motors and generators have many similarities.
FLY WHEEL:-
A fly wheel is a mechanical device specially designed to efficiently store rotational energy. Fly Wheel resists changes in rotational speed by their moment of inertia. The amount of energy stored in a flywheel is proportional to the square of its rotational speed. The way to change a flywheel’s stored energy is by increasing or decreasing its rotational speed by applying a torque aligned with its axis of symmetry.
Energy storage systems delivering energy at rates beyond the ability of an energy source. This is achieved by collecting energy in flywheel overtime and then releasing it quickly, at rates that exceed the abilities of the energy source.
CONFIGURATION:-
1.Fly wheel size
1'×10" Diameter.
2.Thicness 3".
3.Double Groove.
4.Fly wheel belt drive.
5 . Weight 20Kg.\
GENERATOR/ ALTERNATOR:-
Inside an alternator the belt-driven rotor becomes an electromagnet when current is fed to it. As the rotor revolves it generates a higher current in the stator windings
Moving a magnet past a closed loop of wire makes an electric current flow in the wire. Imagine a loop of wire with a magnet inside it.
The north pole of the magnet passes the top of the loop as the South Pole passes the bottom of it. Both passes make current flow in one direction round the loop.
The poles move away, and current stops flowing until the South Pole reaches the top and the north pole the bottom.
This makes current flow again, but in the opposite direction.
A car alternator uses an electromagnet in order to boost output of electric current.
How a dynamo works?
CONFIGURATION:-
Cairo Alternator/Power Generator.
Design on 12 DC volt
Pulley size 2.5"
Pulley single groove.
FIELD WINDING:-
Field windings inside the body are a dynamo's electromagnet. Current is generated in the revolving armature.
In a dynamo the electromagnets are stationary, and are called the field coils. The current is produced in an armature - another set of coils wound on to a shaft and turning inside the field coils.
UNIVERSAL BEARING:-
A bearing is a machine element that constrains relative motion to only the desired motion, and reduces friction between moving parts. The design of the bearing may, for example, provide for free linear movement of the moving part or for free rotation around a fixed axis; or, it may prevent a motion by controlling the vectors of normal forces that bear on the moving parts. Most bearings facilitate the desired motion by minimizing friction. Bearings are classified broadly according to the type of operation, the motions allowed, or to the directions of the loads (forces) applied to the parts.
Rotary bearings hold rotating components such as shafts or axles within mechanical systems, and transfer axial and radial loads from the source of the load to the structure supporting it. The simplest form of bearing, the plain bearing, consists of a shaft rotating in a hole. Lubrication is often used to reduce friction. In the ball bearing and roller bearing, to prevent sliding friction, rolling elements such as rollers or balls with a circular cross-section are located between the races or journals of the bearing assembly. A wide variety of bearing designs exists to allow the demands of the application to be correctly met for maximum efficiency, reliability, durability and performance.
CONFIGURATION:-
•Self allign block bearing.
•Bearing with block No. FKD P-208.
•Bearing internal dia 40mm
TIMER:-
Electronics component is called Timer relay and also called 8 pin relay. It is Use to transfer electricity power by normally open or normally close circuit according to given diagram as given on it. A wide variety of timer designs exists to allow the demands of the application to be correctly met for maximum efficiency, reliability, durability and performance.
CIRCUIT BREAKER:-
It is a safety or unfortunately in case of electric short circuiting happening its immediately cutt off electric power supply by trip off breaker. This is basically use for safety purpose for un happening during operation time.
CONCLUSION:-
According to our statement which we are declaring as under mentioned and research about science. Is science completely correct then where is your proof? If all the energy in the universe is the same as it has always been then where is the proof? Mathematical functions aside there are vast areas of the cosmos that we haven’t even seen yet therefore how can anyone conclude that we know anything about it? We haven’t even been beyond our solar system but you think that we can ascertain what happens with the laws of physics is a galaxy away? Where’s the proof?
“Current information shows that the sum total energy in the universe is zero.” Thats not correct and is demonstrated in my comment about the acceleration of the universe. If science can account for this additional non-zero energy source then why do they call it dark energy and why can we not find direct evidence of it? There is much that our current religion cannot account for.
Why isn’t this scientific theory of the Big Bang relevant? What makes it so in your mind because the source of energy and how it is produced or extracted is precisely the argument here. So saying that it doesn’t matter is no argument.
So what if force and energy are “confused.” It takes energy to produce a force. Whether or not the equations you are familiar with account for it or not. Energy must exist to cause a force in any direction. PE = m x g x h, the force of gravity being relavant here for instance.
“There is no magic involved. You just want there to be to support your desire for fantastical things to be real.”
Lacking a feasible explanation or even tangible evidence for this thing our science calls the Big Bang puts it into the realm of magic. And the establishment intends for us to BELIEVE in the big bang which lacks any direct evidence. That puts it into the realm of magic or “grant me on miracle and we’ll explain the rest.” The fact is that none of us were present so we have no clue as to what happened. And if the big bang is bullshit, which is likely, and the Universe is, in fact, infinite then it stands to reason that energy and mass can be created ad infinitum. Just because we don’t know the rules or methods of construction or destruction doesn’t mean that it is not possible. It just means that we haven’t figured it out yet.
You frequently attack my arguments as wishful thinking but don’t offer any decent argument against. You just simply say that I want there to be such and such to support my ideas. Very effective argumentation.
As for perpetual motion, if you can show me a heavenly body that is absolutely stationary then you win. But that has never once been observed. Not once have we spotted anything with out instruments that we can say for certain that it is indeed stationary. So perpetual motion is not only real but it is inescapable. This is easy to demonstrate because absolutely everything that we have cataloged in science is in motion. Nothing in the universe is stationary. So the real question is why do people think that perpetual motion is impossible considering that we have never observed anything that is contrary to motion. Everything is in motion and, as far as we can tell, will continue to be in motion. Sure Newton’s laws are applicable here and the cause and effect of those motions are also worthy of investigation. Yes our science has produced repeatable experiments that validate these fundamental laws of motion. But these laws are relative to the frame of reference. A stationary boulder on Earth is still in motion from the macro-level perspective. But then how can anything be stationary in a continually expanding cosmos? Where is that energy the produces the force? Where does it come from? How can anyone make the absurd claim that the energy in the universe is constant and yet be unable to account for the acceleration of the universe’s expansion. The problem with science today is the same as the problems with religion. We want to believe that we have a firm grasp on things so we accept our scientific conclusions until experimental results force us to modify those explanations. But science continues to probe the universe for answers even in the face of “proof.” That is science. Always probing for a better, more complete explanation of what works and what doesn’t. But to make claims about knowing the universe, its energy, its mass and so on is hubris and any scientist acknowledges the real possibility that our science could be proven wrong at any given point.
Comments
Post a Comment
Thanks,
Solution Ocean Team
Muhammad Hassan Software House Karachi